i have a nitro truggy but i cant get my throttle or sterring to work it has an on off switch on the frame and the to wires that go to it they r off and i dont know what to do
Rating
breaking your engine by: james mccombie
First a little patience. Also use 16% fuel follow manafactures needle settings also break in procedure. As far as tuneing every 3 weeks this is not needed. After breakin use 20% fuel for 10 tanks or so with manufacturers needle settings. Then switch to 25% fuel. Try turning you low speed 1/2 turn out and your high speed 1/4 turn out. If your engine keeps winding up by it self return your low speed to its origonal state. Also after a good run detach your fuel line and air filter open your carb put 4 to 5 good drops of oil in then pull it through. good luck
